Manual Sterilizers

Our Manual Series E.O. Sterilizers are our economical manually operated , table top range of sterilizers. They work in vacuum mode and use single use 100% E.O. cartridges for the sterilization of heat sensitive goods. They are small in size and useful for small clinics and nursing homes. The sterilization chamber is made from corrosion and gas resistant stainless steel. The inner surface of the chamber is smoothly finished to minimize any gas deposits and ensure a pleasing look. The chamber is electrically heated with our special ROTAHEAT arrangement and is insulated against heat emission.

The sterilizer door is hinged type opening on the side and has a double latching arrangement with a quick release locking spring activated mechanism. A safety interlock is provided to ensure that the sterilization process does not start till the door is closed and latched.

Our The sterilizer is provided with an electric vacuum pump which is used for vacuuming as well as degassing the sterilizer.

Our Manual Series E.O. Sterilizers are provided with a microprocessor based temperature controller which controls the sterilization temperature. The settings for the cycle temperature can be done by the operator as per requirement depending on the heat sensitivity of the products to be sterilized. The temperature for Warm cycle is normally set at 55 degrees centigrade and for the Cold cycle at 37 degrees centigrade.

Features

• • In chamber Gas Vaporizer.
• • Operator accessible Cycle Temperature
• • Microprocessor based Temperature with digital display
• • Very Sturdy and Time tested design and electronics
• • Safer operation - Cycle operates in vacuum; hence minimal chances of leakage